Designed to offer our well-known recoil reduction and flash suppression in a package the same weight as the A2 'birdcage' suppressor. This allows the operator to have both benefits in one package without extra weight or marginal performance. Lightweight (apx 61 gms) and durable, the KA-1222A will handle extended periods of semi or full automatic fire easily. For full-automatic carbines the 30-40% recoil reduction allows more accurate shot placement even at higher cyclic rates. The KA-1222A utilizes KA's controlled-turbulence design and '6/45' porting layout to keep the sight picture clear and reduce muzzle flash, even during full-automatic fire. It has KA's special port design which quickly cools and diffuses escaping gases and shifts them from the white/yellow end of the spectrum to the red/infrared range which is a lot less detrimental to low-light vision. The KA-1222A is optimal for full-auto weapon systems where the recoil reduction of a muzzle brake is advantageous, but the excessive muzzle flash caused by one is not.

Installs easily on 1/2"x28 threaded barrels using a standard A2 crush washer

The KA-1222A offers several innovations which makes it the best rifle brake/
suppressor attachment on the market today:

-Excellent flash suppression for maintaining low-light vision
-Recoil reduction for quicker follow-up shots
-Extremely lightweight yet nearly indestructible

Specifications
Weight: 61 grams (apx)
Overall length: 2.250"
Added length to barrel: 1.562" (apx)
Width: .740"
Finish: MIL-STD171 maganese-phosphate parkerizing
Material: 4140CM (416P70 SS on special edition)
Hardness: 44HRC

History
Introduced: 2008
Current generation: 2nd
Failure/defect rate: 0.00%

This is a limited edition of our KA-1222A brake/suppressor unit.  Every year we produce no more than 50 of our KA-1222A units in 416 stainless steel.  This is an excellent match for custom AR-15 builds with stainless barrels.  These are subject to availability.

Modified KA-1222 for the Polish Tantal rifle in 5.45x39. This unit is lighter and more effective than the AK74 style unit and provides 30-40% recoil reduction and superior flash reduction. Threaded M14x1.0LH and notched for the spring detent.

The KA-1222B offers several innovations which makes it the best rifle brake/suppressor attachment on the market today:

-Excellent flash suppression for maintaining low-light vision
-Recoil reduction for quicker follow-up shots
-Extremely lightweight yet nearly indestructible

Specifications
Weight: N/A
Overall length: N/A
Added length to barrel: N/A
Width: .740"
Finish: MIL-STD171 maganese-phosphate parkerizing
Material: 4140CM
Hardness: 44HRC

History
Introduced: 2008
Current generation: 1st
Failure/defect rate: 0.00%

Designed with the milsurp Soviet rifles in mind, the KA-1230 is a very effective muzzlebrake and flash suppressor in a small lightweight package. Capable of taming the recoil of the powerful 7.62x54R and .308 cartridges or the intermediate 7.62x39 round, the KA-1230 does this very efficiently while cutting flash. This pin-on version is available for most common Soviet .30cal rifle barrels (muzzle OD will be needed to order correct unit) and the KA-T003 and KA-T004 drilling jigs allow the average DIY'er to achieve a professional quality installation at home. Secured by two hardened steel dowel pins, the KA-1230 is easy to install and provides a lifetime of superb performance. The flash suppression for the KA-1230 is tuned for the 7.62x39 cartridge, for optimal suppression on other applications, use the KA-1030 brake/suppressor unit.

The KA-1230 offers several innovations which makes it the best rifle
brake/suppressor attachment on the market today:

-Excellent flash suppression for maintaining low-light vision
-Recoil reduction for quicker follow-up shots
-Extremely lightweight yet nearly indestructible

Specifications
Weight: 62 grams (apx)
Overall length: 2.250"
Added length to barrel: 1.750"
Width: .740"
Finish: MIL-STD171 maganese-phosphate parkerizing
Material: 4140CM
Hardness: 40HRC

History
Introduced: 2007
Current generation: 1st
Failure/defect rate: 0.00%

Designed with the milsurp Soviet rifles in mind, the KA-1230 is a very effective muzzlebrake and flash suppressor in a small lightweight package. Capable of taming the recoil of the powerful 7.62x54R and .308 cartridges or the intermediate 7.62x39 round, the KA-1230 does this very efficiently while cutting flash. This pin-on version is available for most common Soviet .30cal rifle barrels (muzzle OD will be needed to order correct unit) and the KA-T003 and KA-T004 drilling jigs allow the average DIY'er to achieve a professional quality installation at home. Secured by two hardened steel dowel pins, the KA-1230 is easy to install and provides a lifetime of superb performance. The flash suppression
for the KA-1230 is tuned for the 7.62x39 cartridge, for optimal suppression on other applications, use the KA-1030 brake/suppressor unit.

The KA-1230 offers several innovations which makes it the best rifle brake/suppressor attachment on the market today:

-Excellent flash suppression for maintaining low-light vision
-Recoil reduction for quicker follow-up shots
-Extremely lightweight yet nearly indestructible

Specifications
Weight: 62 grams (apx)
Overall length: 2.250"
Added length to barrel: 1.750"
Width: .740"
Finish: MIL-STD171 maganese-phosphate parkerizing
Material: 4140CM
Hardness: 40HRC

History
Introduced: 2007
Current generation: 1st
Failure/defect rate: 0.00%

Designed with the milsurp Soviet rifles in mind, the KA-1230 is a very effective muzzlebrake and flash suppressor in a small lightweight package. Capable of taming the recoil of the powerful 7.62x54R and .308 cartridges or the intermediate 7.62x39 round, the KA-1230 does this very efficiently while cutting flash. This pin-on version is available for most common Soviet .30cal rifle
barrels (muzzle OD will be needed to order correct unit) and the KA-T003 and KA-T004 drilling jigs allow the average DIY'er to achieve a professional quality installation at home. Secured by two hardened steel dowel pins, the KA-1230 is easy to install and provides a lifetime of superb performance. The flash suppression for the KA-1230 is tuned for the 7.62x39 cartridge, for optimal suppression on other applications, use the KA-1030 brake/suppressor unit.

The KA-1230 offers several innovations which makes it the best rifle brake/suppressor attachment on the market today:

-Excellent flash suppression for maintaining low-light vision
-Recoil reduction for quicker follow-up shots
-Extremely lightweight yet nearly indestructible

Specifications
Weight: 62 grams (apx)
Overall length: 2.250"
Added length to barrel: 1.750"
Width: .740"
Finish: MIL-STD171 maganese-phosphate parkerizing
Material: 4140CM
Hardness: 40HRC

History
Introduced: 2007
Current generation: 1st
Failure/defect rate: 0.00%

Designed with the milsurp Soviet rifles in mind, the KA-1230 is a very effective muzzlebrake and flash suppressor in a small lightweight package. Capable of taming the recoil of the powerful 7.62x54R and .308 cartridges or the intermediate 7.62x39 round, the KA-1230 does this very efficiently while cutting flash. This pin-on version is available for most common Soviet .30cal rifle barrels (muzzle OD will be needed to order correct unit) and the KA-T003 and KA-T004 drilling jigs allow the average DIY'er to achieve a professional quality installation at home. Secured by two hardened steel dowel pins, the KA-1230 is easy to install and provides a lifetime of superb performance. The flash suppression for the KA-1230 is tuned for the 7.62x39 cartridge, for optimal suppression on other applications, use the KA-1030 brake/suppressor unit.

The KA-1230 offers several innovations which makes it the best rifle
brake/suppressor attachment on the market today:

-Excellent flash suppression for maintaining low-light vision
-Recoil reduction for quicker follow-up shots
-Extremely lightweight yet nearly indestructible

Specifications
Weight: 62 grams (apx)
Overall length: 2.250"
Added length to barrel: 1.750"
Width: .740"
Finish: MIL-STD171 maganese-phosphate parkerizing
Material: 4140CM
Hardness: 40HRC

History
Introduced: 2007
Current generation: 1st
Failure/defect rate: 0.00%

Designed specifically for the AK47 rifle, the KA-1230T combines a muzzlebrake and flash suppressor in a small lightweight package. Tuned for the 7.62x39 cartridge and threaded for M14x1.0 left hand thread, this unit installs easily on most AK47/RPK type rifles. The KA-1230T also has dual detent notches which allow it to be threaded as closely to the FSB as possible for a tight, precise fit. This unit is rated for full-auto use, even with extended firing cycles.

The KA-1230T offers several innovations which makes it the best rifle brake/suppressor attachment on the market today:

-Excellent flash suppression for maintaining low-light vision
-Recoil reduction for quicker follow-up shots
-Extremely lightweight yet nearly indestructible

Specifications
Weight: 60 grams (apx)
Overall length: 2.250"
Added length to barrel: 1.625" (apx)
Width: .740"
Finish: MIL-STD171 maganese-phosphate parkerizing
Material: 4140CM
Hardness: 40HRC

History
Introduced: 2007
Current generation: 2nd
Failure/defect rate: 0.00%

Designed for the 7.62x39 AR-15 rifle and other "non-standard" apps, the KA-1230U combines a muzzlebrake and flash suppressor in a small lightweight package. Tuned for the 7.62x39 cartridge and threaded for 1/2"x28 thread, this unit installs easily with just an A2 crush washer.  The KA-1230U can also be used as a very effective muzzlebrake on lightweight hunting rifles up to the 30.06 and is easy to install. This unit is rated for full-auto use, even with extended firing cycles.

The KA-1230U offers several innovations which makes it the best rifle brake/suppressor attachment on the market today:

-Excellent flash suppression for maintaining low-light vision
-Recoil reduction for quicker follow-up shots
-Extremely lightweight yet nearly indestructible

Specifications
Weight: 60 grams (apx)
Overall length: 2.250"
Added length to barrel: 1.625" (apx)
Width: .740"
Finish: MIL-STD171 maganese-phosphate parkerizing
Material: 4140CM
Hardness: 40HRC

History
Introduced: 2007
Current generation: 2nd
Failure/defect rate: 0.00%

Designed for the 7.62x39 Czech VZ-58 rifle, the KA-1230U combines a muzzlebrake and flash suppressor in a small lightweight package. Tuned for the 7.62x39 cartridge and threaded for the unique M14x1.0RH thread, this unit installs easily on most VZ-58 type rifles. The KA-1230V also has dual detent notches which allow it to be threaded as closely to the FSB as possible for a tight, precise fit. This unit is rated for full-auto use, even with extended firing cycles.

The KA-1230V offers several innovations which makes it the best rifle
brake/suppressor attachment on the market today:

-Excellent flash suppression for maintaining low-light vision
-Recoil reduction for quicker follow-up shots
-Extremely lightweight yet nearly indestructible

Specifications
Weight: 60 grams (apx)
Overall length: 2.250"
Added length to barrel: 1.625" (apx)
Width: .740"
Finish: MIL-STD171 maganese-phosphate parkerizing
Material: 4140CM
Hardness: 40HRC

History
Introduced: Coming Summer 2012
Current generation: 1st
Failure/defect rate: 0.00%

Scaled down from our KA-0450 unit, this muzzlebrake offers angle ported recoil reduction in a lightweight package. Machined from a solid piece of chrome-moly alloy, this brake is extremely strong and durable. This brake has 30 degree rearward porting to reduce the amount of blast and noise directed toward the shooter. Utilizing KA's proprietary 'gas trap' design, it redirects and vents propellant very efficiently for maximum recoil reduction. Designed for heavy barreled rifles in calibers such as 300 Winchester Magnum, the KA-0430 tames the nastiest recoil that your rifle can dish out.

Specifications
Weight: 124 grams (apx)
Overall length:2.375"
Added length to barrel: 1.625" (apx)
Width: 1.25"
Finish: MIL-STD171 maganese-phosphate parkerizing
Material: 4340CM
Hardness: 40HRC
Thread pitch: 3/4"x28

History
Introduced: 2008
Current generation: 1st
Failure/defect rate: 0.00%